Heating Facts
A dirty evaporator, condenser and blower could increase a heat pump electrical usage by 50% or more.

Just a 1/8th of an inch of soot can reduce a boiler efficiency by 8%.

Proper care of your equipment can save you real dollars on your utility bills.

All leading manufacturers recommend regular maintenance to maintain peak performance.

An outdoor reset control can be installed on any boiler commercial or residential and can reduce for fuel consumption by 10 to 15%.
 

 

Did You Know?
S & J Jamrog provides a wide range of services in addition to HVAC? We also service; oil tanks, pumps, refrigeration, controls, pumps, ventilation, system upgrades and more.... for more information on any of these services or any other needs you have contact us for a free estimate.
.............................

24 Hour Emergency Available!
 

Heating
 ................................

Your heating system provides warmth in the cold months of the year and hot water year round. Environmental information shows that our winter months are becoming colder, increasing our need for efficient heating systems.

S & J Jamrog specializes in commercial heating repair calls for all size boilers and systems experiencing a wide range of symptoms. Boilers require care and proper adjustment to provide efficient operation and to prevent nuisance breakdowns. We offer routine maintenance plans to help prevent those breakdowns.

S & J Jamrog has been providing full-service commercial and residential heating repairs and installation on all types and brands of heating systems since 1965. Our technicians provide expert troubleshooting, diagnosis and repair. We offer 24 hour emergency service and routine scheduled maintenance plans.

Some of our services include:

Commercial Boiler Plan
  • Brush and vacuum clean flue passages
  • Clean combustion chamber
  • Check combustion chamber for fatigue
  • Check for visible leaks
  • Check overall integrity of the boiler
  • Clean and inspect low water cut-offs
  • Check condensate pump controls
  • Check automatic boiler feed
  • Lubricate all motors
  • Check limits and safeties
  • Check flue pipe for fatigue
  • Clean and service burner (nozzles, ignition assembly, fuel metering devices, motor and fan, strainers and filters, clean entire burner housing)
  • Clean and check combustion control
  • Start and check for correct fuel to air ratios and for proper operation
 

Residential Boiler/Furnace Plan
  • Brush and vacuum clean flue passages
  • Check combustion chamber for fatigue
  • Check for visible leaks
  • Check overall integrity of the boiler
  • Lubricate all motors
  • Check limits and safeties
  • Clean and check flue pipe for fatigue
  • Replace nozzle
  • Replace oil filter
  • Replace air filter
  • Clean and check ignition assembly
  • Check burner motor and fan
  • Clean entire burner housing
  • Start and check for correct fuel to air ratios and for proper operation

 

 
 

View a list of all the products we use.

Boilers
Boilers provide heat by using fossil fuel to creating steam or hot water. They require care and routine maintenance to maintain efficiency and longevity. We are experienced in all types and makes of boiler, which allows repairs to be carried out quickly and efficiently. S&J Jamrog has been specializing in the service and repair of commercial boilers for over 40 years. We offer expert service and complete installation on all makes of boilers.

Burners
A burner is a devise that burns fossil fuel to heat water or air to provide heat to your home or building. Whether you have a Beckett AFG, Power flame Type C or a Riello RL Series, or Waste Oil, our technicians will provide expert service.

Furnace
Gas or fuel burning furnaces all work on the same basic principle. The fuel is burned inside an enclosed metal container (generally referred to as a fire box or heat exchanger). The burning fuel warms the heat exchanger. The heat exchanger, now hot, radiates the heat into the air in the living area. The heated air is circulated to the area by a fan. We offer expert service and complete installation on all makes of furnaces.

Geothermal
A Geothermal system is a system that transfers heat from your home to the earth in the cooling mode and from the earth to your home in the heating mode. We offer expert service and complete installation on geothermal systems.

Heat Pump
A heat pump is like an air conditioner. In heating mode, a heat pump will collect heat from the outdoor unit (condenser), and discharge it inside through the air handler. With the help of a reversing valve, the flow of refrigerant moves in the opposite direction and heat is extracted from the air handler and discharged outside, creating air conditioning. We offer expert service and complete installation of heat pumps.

Hot Water Baseboard
Hot water baseboard heat is one of the most common forms of heat. Hot water from the boiler is pumped thru baseboard heaters usually located at the bottom of your exterior walls. We offer expert service and complete installation all hot water baseboard heat systems.

Hydro-Air
Hydro-air systems use a fuel burning boiler or hot water heater to produce hot water. The hot water is piped to an air handler, sometimes called a fan coil. Inside the air handler is a multi-row coil, through which the hot water is circulated. Air is then passed over the coil and ducted to the space. An aquastat or time delay can be used to allow the coil to heat up before turning the blower on, preventing the discharge of cool air that can feel uncomfortable in heating mode. We offer expert service and complete installation on all Hydro-air systems.

Radiant Heat
A radiant heat system is a system where heat is emitted from the floor and warms the people and objects rather than heating the air. This form of heat is very efficient. We offer expert service and complete installation on all radiant heat systems.

Steam
Steam heat is one of the first ways to heat. Steam heating systems are seldom installed now in small residential buildings but are still common in many older ones and some commercial buildings. They are simple in design and operation, but require a higher level of maintenance than modern heating systems. It can be plagued with a combination of simple fixes that will create an owner to want to scream with frustration. Some systems may have things done that should not have been done. Steam systems require care and maintenance and the steam traps and vents should be maintained for optimal performance. S&J Jamrog has been specializing in the complete repair and service of commercial steam heat systems since 1965.